metal extrusion

The Lead Extruder Machine is suitable for various deformable metal extrusions, especially for metal extrusion of copper, aluminum, lead, zinc, silver, etc. The Lead Extruder Machine main parts are the master cylinder assembly, the front beam assembly, the movable beam that drives the squeeze rod, the extrusion cylinder (front and rear), the spindle feeder, the die changer, the main shear with automatic pressure reduction, and the hydraulic device.Using PLC (brand optional), hydraulic manifold (cartridge valve), oil pump motor group (speed control oil pump, servo) to achieve stepless speed regulation (constant speed), manual automatic switching and other functions。 Our extruder equipment is easy to operate, highly automated, and energy efficient.

Product advantages: The cooling bed is mainly made of independent belt-changing (translating) conveying aluminum profiles，Control by PLC. When replacing the felt strip, it is not necessary to remove the entire long shaft like a traditional belt type cold bed. As long as the screw is loosened, the felt strip can be removed, has the advantages of simple structure and convenient operation. The high-temperature felt belt is used to convey the aluminum profile, which effectively prevents secondary bumps and deformations during the conveying process ，reduces the waste. At the same time, it provides a clean and tidy table for the profile，ensure the appearance quality of the profile.Therefore it is applicable for the enterprises to manufacture the section material with large, middle or small specification. It is especially suitable for the requirements of rapid extrusion of extruders, improving production efficiency and product quality and yield.

Extrusion machine product introduction: The main cylinder assembly and front beam assembly of the extruder are connected by four Φ170mm tension columns. The movable beam, the squeeze cylinder, the spindle feeder, the die changing device, the main shear with automatic pressure reduction, and the hydraulic device are driven by the squeeze rod. The extruder is supported by a base of welded steel construction.

We are a professional supplier of metal extrusion equipment，We can make a whole program for you， only need you to provide the following information: 1. Drawing. 2. Product material requirements. 3. Product Usage. 4. output. The extruder is suitable for various deformable metal extrusions, especially for metal extrusion of copper, aluminum, lead, zinc, silver, etc. The main parts are the master cylinder assembly, the front beam assembly, the movable beam that drives the squeeze rod, the extrusion cylinder (front and rear), the spindle feeder, the die changer, the main shear with automatic pressure reduction, and the hydraulic device.Using PLC (brand optional), hydraulic manifold (cartridge valve), oil pump motor group (speed control oil pump, servo) to achieve stepless speed regulation (constant speed), manual automatic switching and other functions。 Our extruder equipment is easy to operate, highly automated, and energy efficient.